Knife Sharpener (Bbil-03)

Description:

BBIL-03 sharpening tool converts the traditional single-sided sharpener to double-sided sharpening with tungsten steel technology to greatly increase sharpening speed.

The angled design makes your knives sharper and more durable.

Sharpening the Knives:

Place the sharpener on a flat surface, sharpen with your left hand hold the handle of the tool, place the blade vertically in the V-groove with your right hand, and pull back with appropriate force.

The blade a few times until it becomes sharp. continue to pull back in the direction of the arrow 3 times, then place the blade vertically in the middle section to reach optimum sharpness.

Note: If the blade is not sharp enough, please check the position or angle of the blade in the sharpening area (V-groove).

Note: If there are gaps in the blade or the tip is not sharpened, if the part is too thick, please flatten it before use. Before sharpening, clean the dirt on the blade so that it does not reduce the sharpening effect. Do not use unsuitable ceramic knives and scissors.

Total Length : 20 cm

Package/Box           : 1/48

Box Size             : 22x48x41 cm